The product can automatically manage the working of solar panel and battery in the solar system. It is easy to set up and operate.
For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically (LCD will be unavailable at the same time).
Change the default setting of the solar controller, requires:
1. Disconnect the solar panel
2. ensure the remaining voltage of battery no less than 12V
<1>Please keep it in a cool and well-ventilated place to maintain good heat dissipation.
<2>the regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Make sure your battery has enough voltage for the controller to recognize the battery before the first installation.
Warm Tips: Only voltage reading in the screen of the solar controller, no amps or amp hours.
Features: –Automatically manage the working of solar panel and battery in the solar system.
–Overloading and short-circuit protection.
–Built-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
–Protection from a lightning strike.
–Prolong the battery life cycle and keep the load work well. —
Easy to set up and operate. –Suitable for small solar energy system. Specification:
*Voltage: DC 12V/24V *Self-consuming: 10MA *Rated Charge Current: 20A
*Rated Load Current: 20A *Over charge Protection: 14.4V/28.8V
*Over charge Floating charge: 13.7V/27.4V *Charge recover voltage: 12.6V/25.2V
*Over discharge Protection: 10.7V/21.4V
*Over discharge Recover: 12.6V/25.2V
*USB output: 5V/3A
*Operating temperature: -35℃-60℃
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in Warm Tips: Wire Range 26-10 AWG(4.0mm²)
Package List: 1 * Solar Charge Controller 1 * User’s Manual